Ventilation Hood Low Severity
LED-WIFI Miele Error Code

WiFi / Connectivity Connection Issue

The LED-WIFI error code on your Miele Ventilation Hood indicates wifi / con@ctivity connection issue. This is a Low severity issue. The ventilation hood is experiencing a WiFi or Miele Connectivity communication issue. Miele hoods with Connectivity can communicate wirelessly with compatible cooktops to automatically adjust fan speed based on cooking activity. This error indicates […]

~80%

DIY Fixable

From $0

Typical Repair Cost

10–30 min

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. The hood works perfectly via manual controls. Only smart/automatic features are affected.

Can I reset the code?

Yes. Yes — re-pairing and power cycling resolve most connectivity issues.

When to stop immediately?

Stop if you notice: WiFi module does not appear in the app after multiple re-pair attempts, Connectivity never worked since installation (compatibility issue).

Symptoms You May Notice

Blinking LED on control panel

One or more LEDs flash in a pattern indicating WiFi pairing mode or connection loss.

Connectivity not activating hood

The hood does not turn on automatically when the cooktop is used (Connectivity feature).

Miele app shows problem code

Codes like 2.1.24.18 or 3.1.52 appear in the Miele@home app.

Hood works manually but not automatically

Manual buttons work fine, but smart/automatic features don't.

Possible Causes

1

WiFi router changed or moved

A new router, changed password, or repositioned router disrupts the hood's WiFi connection.

DIY Possible
2

Connectivity pairing lost

The wireless link between the cooktop and hood needs to be re-established.

DIY Possible
3

WiFi module firmware issue

The hood's WiFi module needs a firmware update.

DIY Possible
4

WiFi module hardware failure

The built-in WiFi communication module has failed.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Re-pair Connectivity

    Put both the cooktop and hood into pairing mode simultaneously. The exact procedure varies by model — consult your manual.

    Connectivity uses a dedicated wireless protocol, not your home WiFi.

  2. 2

    Reconnect WiFi

    Open the Miele@home app. Go to the hood settings and re-enter your WiFi credentials. The hood may need to be put into WiFi pairing mode (usually hold a button combination for 5 seconds).

    The hood connects on 2.4 GHz only — 5 GHz networks won't work.

  3. 3

    Power cycle everything

    Turn off the hood at the breaker, turn off the WiFi router, wait 2 minutes, turn the router back on first, then the hood.

    A fresh network connection often resolves app problem codes.

  4. 4

    Update firmware

    Check the Miele@home app for pending firmware updates for the hood. Install any available updates.

    Firmware updates can fix connectivity bugs.

When to Call a Professional

Contact a qualified Miele technician if:

  • WiFi module hardware failure
  • Incompatible cooktop/hood combination for Connectivity

Need Professional Help?

Find qualified Miele technicians in your area for proper diagnostics and repair.

Ventilation Hood Repair Service Schedule Appointment

More Ventilation Hood Error Codes

View all codes →
LED-PERF LED-NOISE LED-LIGHT LED-FAN LED-NR LED-CF LED-GF