Ventilation Hood Low Severity
LED-LIGHT Miele Error Code

Lighting Not Working – LED Module Failure

The LED-LIGHT error code on your Miele Ventilation Hood indicates lighting not working – led module failure. This is a Low severity issue. The ventilation hood lighting is not functioning. Miele range hoods use LED light modules to illuminate the cooktop area. When the lighting fails, it is typically an LED module, driver, or connection […]

~20%

DIY Fixable

From $80

Typical Repair Cost

30 min – 1 hr

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. The fan and extraction work normally. Only the lighting is affected. Use alternative kitchen lighting while waiting for repair.

Can I reset the code?

Yes. A power reset may fix a control glitch. It won't fix a burned-out LED module.

When to stop immediately?

Stop if you notice: Lights flicker and produce burning smell, Multiple electrical issues appear simultaneously.

Symptoms You May Notice

Lights do not turn on

Pressing the light button produces no illumination.

Lights flicker

LEDs turn on but flicker or pulse.

Only some lights work

One LED module works while another is dark.

Fan works normally

Extraction functions are unaffected.

Possible Causes

1

LED module burned out

The integrated LED light module has reached end of life. These are not standard bulbs.

Requires Professional
2

LED driver problem

The small electronic driver that powers the LED has failed.

Requires Professional
3

Loose LED connector

The connector between the LED module and the hood wiring has come loose.

DIY Possible

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Power reset

    Turn off at breaker for 1 minute, then back on. Test the lights.

    A control glitch can sometimes cause lighting to stop working.

  2. 2

    Check if halogen (older models)

    Some older Miele hoods use replaceable halogen bulbs. Check your manual — if halogen, the bulb can be replaced.

    Halogen bulbs twist or clip out. Handle replacement bulbs with a cloth — skin oils shorten halogen life.

  3. 3

    Note which lights are affected

    If only one light is out, the LED module for that position has failed. If all lights are out, the driver or control board is the issue.

    This information helps the technician order the right part before visiting.

When to Call a Professional

Contact a qualified Miele technician if:

  • LED module burned out (non-replaceable by user)
  • LED driver circuit failed
  • Control board lighting relay failed

Need Professional Help?

Find qualified Miele technicians in your area for proper diagnostics and repair.

Ventilation Hood Repair Service Schedule Appointment

More Ventilation Hood Error Codes

View all codes →
LED-PERF LED-WIFI LED-NOISE LED-FAN LED-NR LED-CF LED-GF