Ventilation Hood High Severity
LED-FAN Miele Error Code

Fan Not Working – Motor or Speed Issue

The LED-FAN error code on your Miele Ventilation Hood indicates fan not working – motor or speed issue. This is a High severity issue. The ventilation hood fan motor is not operating or is running at an incorrect speed. The hood cannot extract cooking fumes, steam, and odors without a functioning fan. This is a […]

~15%

DIY Fixable

From $150

Typical Repair Cost

1–3 hrs

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. Without fan extraction, cooking fumes, grease particles, and moisture are not removed — use alternative ventilation while cooking.

Can I reset the code?

Yes. A power reset may fix a control board glitch. It will not fix a failed motor or capacitor.

When to stop immediately?

Stop if you notice: Burning smell from the motor area, The hood trips the circuit breaker.

Symptoms You May Notice

Fan does not spin

Pressing fan speed buttons lights up the indicator but produces no airflow.

Fan only works on one speed

Only the highest speed works, or only the lowest.

Fan is very noisy

Grinding, rattling, or buzzing sounds from the motor area.

Lights work, fan doesn't

The hood has power (lights turn on) but the extraction fan is dead.

Possible Causes

1

Motor capacitor failed

The run capacitor that helps start and drive the fan motor has failed. This is the most common cause of a dead fan on older hoods.

Requires Professional
2

Fan motor burned out

The fan motor winding has failed — often preceded by months of gradually increasing noise.

Requires Professional
3

Fan blade obstructed

Grease buildup or a foreign object is preventing the fan from spinning.

DIY Possible
4

Speed control board problem

The electronic board that controls fan speed has a failed component.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Listen carefully

    Press the fan speed button and listen. A humming sound with no airflow means the motor is trying but the fan is stuck or the capacitor has failed.

    No sound at all = motor or control board issue. Humming = capacitor or obstruction.

  2. 2

    Check for obstruction

    Remove the grease filters. Look into the fan area for visible grease buildup, debris, or a foreign object blocking the fan blade.

    On some models, heavy grease accumulation can seize the fan bearing.

  3. 3

    Power reset

    Turn off at breaker for 1 minute, then back on. Test the fan.

    A control board glitch can sometimes be resolved by a full power cycle.

When to Call a Professional

Contact a qualified Miele technician if:

  • Motor hums but does not spin
  • Motor bearing noise (grinding/rattling)
  • No voltage reaching the motor (control board issue)

Need Professional Help?

Find qualified Miele technicians in your area for proper diagnostics and repair.

Ventilation Hood Repair Service Schedule Appointment

More Ventilation Hood Error Codes

View all codes →
LED-PERF LED-WIFI LED-NOISE LED-LIGHT LED-NR LED-CF LED-GF