Power Failure Detected
The F0 error code means your Miele refrigerator has detected a power interruption. It alerts you that the internal temperature may have risen above safe levels while the power was off.
~95%
DIY Fixable
$0
Typical Repair Cost
1 min
Pro Repair Time
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. F0 is an informational alert, not a fault. The refrigerator is safe once power is restored and temperatures normalize.
Can I reset the code?
Yes. Yes — acknowledge the alarm and the code clears. Temperatures will recover automatically.
When to stop immediately?
Stop if you notice: Temperature does not recover after several hours, Compressor does not start.
Symptoms You May Notice
Temperature warning on display
Display shows a power failure alert after power is restored
Audible alarm
Buzzer sounds when power returns
F0 on display
Power failure notification
Possible Causes
Mains Power Outage
A general power outage occurred in your area.
DIY PossibleTripped Circuit Breaker
The breaker for the kitchen circuit tripped.
DIY PossibleLoose Plug
The refrigerator plug was not fully inserted.
DIY PossibleSafe Checks You Can Do
-
1
Check Power Supply
Verify the plug is fully inserted and the circuit breaker is on.
Plug the fridge into a known-good outlet to test.
-
2
Acknowledge the Alarm
Press the alarm button on the display to silence the alert.
The code clears once acknowledged.
-
3
Check Food Safety
If the outage was longer than 4 hours, check food temperatures. Discard perishables that exceeded 5°C / 40°F.
A full freezer holds temperature longer than a half-empty one.
-
4
Monitor Temperature
Watch the display for 2-4 hours to confirm temperatures return to normal.
Avoid opening the door frequently.
When to Call a Professional
Contact a qualified Miele technician if:
- Compressor fails to restart
- Repeated power failure codes with stable mains power
Need Professional Help?
Find qualified Miele technicians in your area for proper diagnostics and repair.
Schedule Appointment