Coffee Machine Low Severity
F2 Miele Error Code

Bean Hopper Empty or Grinder Issue

The F2 error code means your Miele coffee machine cannot detect coffee beans in the hopper or the grinder is not processing beans correctly.

~80%

DIY Fixable

$0-250

Typical Repair Cost

5 min – 1 hr

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. F2 is usually a supply issue — add beans and clear any clogs. The machine is safe to use once beans reach the grinder.

Can I reset the code?

Yes. Yes. Add beans, clear the chute, and reset.

When to stop immediately?

Stop if you notice: Grinder makes no sound at all, Foreign object stuck in grinder.

Symptoms You May Notice

Fill beans message

Display prompts to add beans even if beans are present

Grinder runs but no coffee dispenses

Machine goes through motions but produces no coffee

Weak or watery coffee

Insufficient grounds reaching the brew unit

F2 on display

Persistent alert about beans

Possible Causes

1

Empty Bean Hopper

Simply out of beans.

DIY Possible
2

Oily Beans Clogging Chute

Very oily dark-roast beans have clogged the bean chute between hopper and grinder.

DIY Possible
3

Grinder Jammed

A stone or foreign object is stuck in the grinder.

DIY Possible
4

Grinder Motor Fault

The grinder motor has failed.

Requires Professional
5

Bean Sensor Fault

The sensor detecting bean level has failed.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Add Beans

    Fill the bean hopper with fresh coffee beans.

    Use medium-roast beans — very oily dark roasts clog more easily.

  2. 2

    Clear the Bean Chute

    Remove the beans. Use a vacuum or long brush to clear the narrow chute between hopper and grinder.

    Oily residue can create a bridge that blocks beans from falling.

  3. 3

    Check for Foreign Objects

    Look into the bean hopper for stones, twigs, or other debris that may have come with the beans.

    Even a small stone can jam the grinder.

  4. 4

    Run the Grinder

    Add beans and start a brew. Listen for the grinder — a healthy grinder has a consistent whirring sound. Silence or clicking = jam.

    If jammed, turn off and try again after clearing.

  5. 5

    Power Reset

    Turn off at mains for 5 minutes.

    The grinder controller may need to reinitialize.

When to Call a Professional

Contact a qualified Miele technician if:

  • Grinder motor failed
  • Bean sensor defective
  • Internal grinder jammed beyond clearing
  • Under warranty

Need Professional Help?

Find qualified Miele technicians in your area for proper diagnostics and repair.

Schedule Appointment

More Coffee Machine Error Codes

View all codes →
F99 F53 F50 F30 F11 F10 F9 F8 F6 F5 F4 F3