Cooktops / Rangetops / Ranges Diagnostics

Miele Cooktops / Rangetops / Ranges
Error Codes

Meanings, severity levels, safe checks you can perform, and when to call a technician.

Enter the code shown on your cooktops / rangetops / ranges display

Is it safe to keep using it?

Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.

Can error codes be reset?

Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.

When should I stop using it?

Stop immediately for water leak codes, burning smell, or any High severity error.

Most Common Codes

F2 ERR 047 ERR 044 ERR 030 FE 99 FE 47 FE 35 F4 F3 F1

All Codes

ERR 030 ERR 044 ERR 047 F F1 F2 F3 F4 FE 35 FE 47 FE 99

Error Code Directory

Click any code for detailed troubleshooting steps

Low Medium High

Code Meaning Severity Common Symptom

ERR 030 Connection / Voltage Error High The error and number show in the power level and timer displays. View ERR 044 Overheating Protection (Newer Models) High Appears after the cooktop has been running at high heat or with ventilation issues. View ERR 047 Fan Blocked or Defective (Newer Models) Medium Different numbers indicate different fan zones (left, right, middle). View F Safety Cut-Out – Sensor Covered Low The cooktop stops heating mid-cook and the display shows "F". View F1 Calibration Fault – Surrounding Area Too Bright Low The code appears during power-on or while adjusting settings. View F2 Calibration Fault – Pulsating Light Interference Low Appears when nearby fluorescent or flickering lights are on. View F3 Calibration Fault – Sensor Covered by Light-Colored Item Low Appears when a light-colored item is near the controls. View F4 Calibration Fault – Fluctuating Ambient Light Low Appears during periods of variable light conditions. View FE 35 Low Voltage / Connection Fault High The code shows in both the power level and timer displays. View FE 47 Cooling Fan Blocked or Defective Medium Appears during or after cooking when the fan should be running. View FE 99 Overheating Protection Activated High The code appears and all zones are disabled. View