Washer Medium Severity
F62 Miele Error Code

Selector Switch / Slide Switch Fault

The F62 error code means the program selector switch or slide switch on your Miele washing machine is not sending a valid signal to the control board. The board cannot determine which program you have selected.

~25%

DIY Fixable

$120-300

Typical Repair Cost

30 min – 1.5 hrs

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Maybe. If you can select and start a working program, the machine is safe to use on that program. If the selector is completely non-functional, the machine cannot be operated.

Can I reset the code?

Yes. Yes. A reset may re-initialize the selector encoder. If the switch is physically worn, the code will return.

When to stop immediately?

Stop if you notice: No program can be selected at all, The dial spins freely with no resistance.

Symptoms You May Notice

Cannot select a program

Turning the program dial or pressing buttons has no effect

Wrong program runs

The machine starts a different program than the one selected

Display flickers between programs

The selector switch sends unstable signals

F62 on startup

The code appears as soon as you try to operate the machine

Possible Causes

1

Dirty Selector Switch

Dust, detergent residue, or moisture has contaminated the switch contacts.

DIY Possible
2

Worn Switch Contacts

After thousands of operations, the electrical contacts have worn.

Requires Professional
3

Loose Connection

The wiring connector to the selector has come loose.

Requires Professional
4

Failed Encoder

The rotary encoder that reports the dial position has failed.

Requires Professional
5

Board Input Fault

The circuit that reads the selector input has failed on the PCB.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Clean the Selector Area

    Wipe around the program dial or buttons with a slightly damp cloth. Remove any detergent residue or buildup.

    Do not spray liquid directly on the controls.

  2. 2

    Turn the Dial Multiple Times

    Rotate the selector through all positions several times. This can clean oxidized contacts through mechanical action.

    On push-button models, press each button firmly several times.

  3. 3

    Power Reset

    Turn off at mains for 5 minutes. The selector encoder may need to reinitialize.

    After reset, try selecting a specific program and verify the display shows the correct one.

  4. 4

    Try a Default Program

    Turn the dial to the first (default) position and press Start. If this works, the issue may be limited to certain switch positions.

    If only specific positions fail, the switch is partially worn.

  5. 5

    Note the Behavior

    Does the dial feel loose, gritty, or loose? Does the display change as you turn? This information helps a technician.

    A dial that spins freely without detents indicates a broken mechanism.

When to Call a Professional

Contact a qualified Miele technician if:

  • Selector switch is mechanically broken
  • Encoder does not generate valid signals
  • Connection to the board is damaged
  • Under warranty

Need Professional Help?

Find qualified Miele technicians in your area for proper diagnostics and repair.

Schedule Appointment

More Washer Error Codes

View all codes →
F138 F103 F56 F53 F50 F46 F43 F35 F34 F29 F20 F19